Lightweight Chimney Insert and Duct Modules

Lightweight chimney insert and duct modules

Lightweight chimney insert and wall duct modules

Overview of lightweight chimney variants, inserts and fire protection ducts

 
 
 
 
 
 
 
 

Lightweight Chimney Modules FURADO-F - Lightweight Chimney System for Solid Fuel Fireplaces

Furado-F example installation
 
 

Lightweight chimney system consisting of calcium silicate fire protection boards with Jeremias inner tubes EW-FU or EW-KL and 25 mm insulating shells. Roof type with system DW-ECO 2.0, DW-FU or shaft with casing possible.

Furado-F module

    Suitable for:

  • Solid fuel control furnaces (untreated wood, coke, peat, coal)
  • New construction and renovation
  • LAS operation of solid fuels
    * except anthracite coal from Ibbenbüren

 

Lightweight Chimney Modules FURADO-F-LAS - Concentric, Room-air-independent, Lightweight Chimney System for Solid Fuel Fireplaces

Furado-F-LAS installation example
 
 

Concentric room-air-independent lightweight chimney system consisting of Jeremias inner tube EW-FU, 25 mm insulating shells and calcium silicate shaft as outer shell.

The supply air of the fireplace is guided through the required annular gap between the insulation and the shaft inner surface.

Furado-F-LAS module

    Suitable for:

  • Solid fuel control furnaces (natural wood)
  • New construction and renovation

Lightweight Chimney Modules FURADO-A - Lightweight Chimney System for Oil or Gas Fuel Fireplaces

Furado-A installation example
 

Lightweight chimney system consisting of calcium silicate fire protection boards with Jeremias inner pipes EW-KL, EW-AL-BI, EW-PPS or EW-PP-FLEX, depending on the exhaust gas temperature with 25 mm insulation shells. Roof-top version with shaft and panel possible.

Alternative:
Furado-A module Mounting shaft for mounting CE-certified inner tubes, depending on the exhaust gas temperature with 25 mm insulating shells

    Suitable for:

  • Control furnaces for oil or gas fuels
  • New construction and renovation

Fire Protection Duct LUX-NOVA - Wall, ceiling and roof ducts for exhaust systems

Lux-Nova installation example
 

Variable and may be shortened wall, ceiling and roof ducting for chimneys, flue pipes and fittings
Variant 1: with pipe cutout
Variant 2: without pipe cutout

Lux-Nova module

    Suitable for:

  • Passage of flue pipes through walls made of flammable building materials
  • Meets the requirements of the regulations of the federal states and of DIN V 18160-1
  • Approved for flue pipes of flue gas systems or chimneys up to Temperature classification T400
  • Use for pipe penetrations in interior and exterior walls
  • Significant reduction of the lateral clearance dimensions for pipe penetrations compared to FeuVO

Fire Protection Duct LUX-ECO - Wall, ceiling and roof duct for insulated flue pipes / stovepipes

Lux-ECO installation example
 
 

Inexpensive wall, ceiling and roof duct for insulated flue pipes / stovepipes

Lux-ECO install sample

    Suitable for:

  • Approved for the passage of insulated flue pipes and flues of exhaust systems or chimneys
  • Maximum Exhaust gas temperature of the flue pipes and fittings 400 ° C (T400)
  • Significant reduction in side clearance for smoke pipe ducts compared to FeuVo
  • Especially practicable for pitched roofs and external insulation on buildings

 

 

Source: Jeremias GmbH. Note: all images of chimney systems and components on this page are Copyright Jeremias GmbH.